Fluid Film Bibliography

[613]
Arai, T., Hashimoto, H., 1985. Disintegration of a thin liquid sheet in a concurrent gas stream, Proceedings of the Third International Conference on Liquid atomization and Spray Systems, London

[614]
Bai, C. and Gosman, A.D. 1996. “Mathematical modeling of wall films formed by impinging sprays”, SAE Technical Paper Series 960626.

[615]
Caraghiaur, D. 2012. "On Drops and Turbulence in Nuclear Fuel Assemblies of Boiling Water Reactors" PhD thesis, KTH School of Engineering Sciences.

[616]
Caraghiaur, D., and Anglart, H., 2008. "Langrangian particle tracking as a tool for deposition modeling in annular flow," in Proceedings of the 17th International Conference on Nuclear Engineering (ICONE17).

[617]
Cioncolini, A., Thome, J., and Lombardi, C. 2009. Algebraic turbulence modeling in adiabatic gas-liquid annular two-phase flow, International Journal of Multiphase Flow, 35, pp. 580-596.

[618]
Foucart, H. Private Communication.

[619]
Friedrich, M. A., Lan, H., Drallmeier, J. A., Armaly, B. F. 2007. A separation criterion with experimental validation for shear-driven films in separated flows, Accepted for publication by ASME J. Fluids Engineering.

[620]
Gubaidullin, A. 2007. Comments on Liquid film atomization on wall edges separation criterion and droplets formation model, J. Fluids Engineering, 129, pp. 665-666.

[621]
Gmehling, J., Li, J. and Schiller, 1993. A modified UNIFAC model. 2 present parameter matrix and results for different thermodynamic properties, Ind. Eng. Chem. Res. 32, pp.178-193.

[622]
Habchi, C. 2010, "A Comprehensive Model for Liquid Film Boiling in Internal Combustion Engines", Oil & Gas Science and Technology 65 (2), pp. 331-343.

[623]
Hinze, J.O. 1975, "Turbulence" , McGraw-Hill, New York.

[624]
Kistler, S. F. 1993, "Hydrodynamics of wetting", Wettability, pp. 311.

[625]
Ledoux, M. 1993. Modelisation des Sprays, Cours de DEA.

[626]
Maroteaux, F., Llory, D., Le Coz, J-F., Habchi, C. 2002. Liquid film atomization on wall edges separation criterion and droplets formation model, J. Fluids Engineering, 124, pp. 565-575.

[627]
Mudawwar, I., and El-Masri, M. 1986. Momentum and heat transfer across freely falling turbulent liquid films, International Journal of Multiphase Flow, 12 (5), pp. 771–790.

[628]
Sirignano, W.A. 1999. Fluid Dynamics and Transport of Droplets and Sprays, Cambridge University Press, New York.

[629]
Torres, D.J., O’Rourke, P.J., and Amsden, A.A. 2003. “Efficient multicomponent fuel algorithm”, Combust. Theory Modelling, 7, p. 67.

[630]
Ueda, H., Moller, R., Komori, S., and Mizushima, T. 1977. Eddy Diffusivity near the free surface of open channel flow, International Journal of Heat and Mass Transfer, 20, pp. 1127–1136.

[631]
UNIFAC theory, https://scm.com/doc/COSMO-RS/UNIFACtheory.html, opened on April,19th, 2021.

[632]
White, F.M. 1988. “Heat and Mass Transfer”. Addison Wesley.

[633]
Zaichik, L.I., Alipchenkov, V.M., and Sinaiski, E.G. 2008. "Particles in turbulent flows" WILEY-VCH Verlag Gmb & Co, ISBN 978-3-527-40739-2.